A Workshop Story from Baltimore

Men’s Caps · November 2026
Baltimore, MD

“If You Wouldn’t Wear It Yourself, Don’t Send It Out.” Why a Baltimore cap maker is giving away every last handmade cap at $0 as he closes the workshop his father opened in 1958.

Walter Ashford’s father opened this workshop in 1958, in a brick building off Eastern Avenue in Baltimore, after years on the line at Bethlehem Steel. Walter learned the trade at the same bench, starting after school at thirteen. After 68 years, the workshop is closing. 2,847 finished caps are still on the shelves. Every one is $0 instead of $79.95.

Walter Ashford, second-generation cap maker, at the 1958 workbench in the Ashford & Sons workshop in Baltimore.
Walter Ashford, second-generation cap maker, at the original 1958 workbench in the Ashford & Sons workshop, Baltimore.

The workbench is still there. The legs are nicked up pretty good. There is a coffee ring his father left in 1971 that Walter says he couldn’t sand out if he tried. He can still see the pencil lines where new patterns were marked. It is not a display piece. He works on it every morning.

Around him, wooden shelves are stacked with finished flat caps — denim, herringbone, wool, mesh. 2,847 of them, all made in this workshop, all still waiting for a head.

Walter Ashford picks one up, a washed denim Ivy cut, and holds it to the light the way his father taught him.

“Hold it up to the light. If you wouldn’t wear it yourself, don’t send it out.”

How a steelworker started a cap shop

Walter’s father had been working the line at Bethlehem Steel. On the side, he made his own caps, because he could not find one in the stores that sat the way he wanted. His buddies at the plant kept asking him to make theirs.

So he did. In 1958 he opened this workshop in a brick building off Eastern Avenue. No advertising. No labels. Just good caps, word of mouth around Fells Point, and a man who wouldn’t let a bad stitch leave the bench.

Walter started helping after school when he was thirteen. Sweeping scraps, sorting buckles, pressing seams his father had already tacked. By fifteen he was cutting his own panels. By nineteen he could shape a cap start to finish in under forty minutes.

When his father passed, he left Walter the keys, the bench, and that one rule about holding a cap up to the light. Walter kept the name and the bench. Every cap still gets hand-shaped there. He picks the cloth. He cuts it. He stitches it. He fits the buckle and checks the brim himself. If it isn’t right, it doesn’t leave.

“Some people call that old-fashioned,” he says. “I call it the job done right.”

Inside the Ashford & Sons workshop in Baltimore. Shelves lined with flat caps in denim, charcoal, tweed, and olive. A worn wooden workbench sits in the center.
Inside the Ashford & Sons workshop in Baltimore. The last finished caps are still on the shelves.

The drawer full of caps that never sat right

Walter knows what men do with a cap that looked right on a website and wrong on their head. They wear it once. Then it goes in a box in the closet, or a drawer, and another one gets ordered to replace it.

“Eight, twelve, maybe thirty caps that all promised to fit and none of them did,” he says. “I hear it every week.”

A lot of those caps come off the same factory line. Punched out by machine, boxed up, shipped before anyone has held them up to the light. Many of them use a tall, puffy newsboy crown — the shape that makes a man look as if he is dressing up for a period drama. That is not the shape Walter makes.

Split image. Left: a box of rejected hats collecting dust. Right: a single Ashford denim flat cap on a clean wooden surface.
Left: what Walter calls the hat graveyard. Right: a low-profile Ivy cut from the Baltimore bench.

A cap shaped on a bench from 1958

An Ashford cap is cut, shaped, stitched and finished by hand in this workshop. The crown is formed on a wooden block, in the same pattern shape Walter’s father designed. The brim is stiffened just enough to hold its line without feeling like cardboard. The buckle is metal. The fit is real.

It is a low-profile Ivy cut. Slim crown. Soft curve. The kind of cap a man puts on and forgets he is wearing.

“You don’t break in an Ashford cap,” Walter says. “You put it on and it fits.”

The washed denim is soft from day one. The metal buckle at the back means one size genuinely fits all. No guessing, and no sending it back because a head sits between a medium and a large.

Walter Ashford inspecting a denim flat cap at the original 1958 workbench in his Baltimore workshop.
Every cap in this last collection was hand-shaped on the same wooden bench Walter’s father put in the day the workshop opened.

The note in the box, and the first compliment

The men who already wear these caps write back about small things. A handwritten note from Walter in the box. A wife who had never liked a hat on him before. A neighbor who asked where he got it.

Jim D., in Richmond, Virginia, ordered on a Tuesday. The cap showed up Saturday, with that note in the box. “My wife said it was too good to be true,” he wrote. “Better than I expected.”

John P. has been married 34 years. “My wife likes me in it,” he said. “First hat she’s ever said that about. That’s a review right there.”

Larry S., in Lancaster, Pennsylvania, said he gets compliments everywhere he goes. “My neighbor asked where I got it. My son-in-law asked. Told them both about Walter’s shop.”

A washed denim Ashford flat cap on brown paper with a handwritten note from Walter, twine, and a cup of coffee.
A cap as it arrives, with the handwritten note men keep mentioning.

What makes an Ashford cap sit right

There is no trick to it, and Walter will not pretend there is. It is a flat cap. What it does, it does in three simple ways.

It sits low. The Ivy cut is slim, not puffy, so the cap looks like something you already own, not a costume. It is shaped by hand on the 1958 bench, so it does not come off a machine-stamped factory line. And the metal buckle adjusts to the head, not the other way around, so one size is actually one size.

He is honest about the shape, too. If a man wants that tall newsboy crown, this is not it. This is the slim, modern shape. Soft from the first wearing. Denim, wool, herringbone, leather, mesh — every style he makes is in this last collection, and every one is the same offer: $0 instead of $79.95.

A man wearing a dark denim Ashford flat cap in a sunny backyard, with a grill behind him.
The low-profile Ivy cut on a Saturday afternoon. Soft from day one, and meant to be worn, not stored.

The same way it always spread

The shop did not start with advertising. It started with men at the plant asking for a cap, and with word of mouth around Fells Point. That part has not changed.

Ed K., in Annapolis, Maryland, is on his third cap from Walter. He has been coming back since 2021. “Never had one fall apart on me,” he wrote. “This one’s my daily driver.”

Mike, 54, from Pennsylvania, put it more bluntly: “Every one gets shaped on the same wooden bench his dad used since ’58. The workshop is closing and these are the last ones. I grabbed two.”

Ashford Denim Vintage Cap, a low-profile Ivy cut in washed denim blue.
Denim Vintage. Washed, soft from day one.
Ashford Herringbone Wool Cap in tobacco brown.
Herringbone Wool. Same Ivy cut, same bench.

Why these are the last ones

After 68 years in Baltimore, the Ashford & Sons workshop is closing. For good.

“I’m not walking out with 2,847 finished caps sitting on shelves in an empty building,” Walter says.

He could have boxed them up. He could have locked the door and left them to collect dust in an empty room. Or he could have put them on the heads they were made for. He chose heads.

Every cap is $0 instead of $79.95.

“My father made caps for every man who walked through his door. Bankers. Bus drivers. Teachers. He never priced a man out of looking good. On my last day, neither will I.”

When these 2,847 caps are gone, that’s it. There is no next collection. No restock. The shelves will be empty. The bench will be still. The lights go off.

1

Hand-shaped on the 1958 bench. Every cap is cut, shaped, stitched and finished by hand in the Baltimore workshop, on the wooden bench Walter’s father installed when he opened the doors.

2

A low-profile Ivy cut. Slim crown, soft curve. Not the tall, puffy newsboy shape. The kind of cap you put on and forget you’re wearing.

3

Soft from day one. You don’t break in an Ashford cap. The washed denim, and the other fabrics Walter uses, are made to be worn the day they arrive.

4

A metal buckle. One size. The adjuster at the back fits the cap to your head, not the other way around. No guessing between a medium and a large.

5

A 30-day fit guarantee. Wear it to the store. Wear it around the house on a Sunday. If it doesn’t sit right, send it back. Full refund.

6

Every style he makes. Denim, herringbone, wool, leather, mesh. The last caps from this workshop, each one $0 instead of $79.95.

We’re closing. What’s left of the last caps is all there is, and there will not be another collection from this workshop.

Every cap is $0. Choose yours.

The last caps from Ashford & Sons, instead of $79.95. Shipping is paid at checkout.

See every cap — $0

The last caps from this workshop · 30-day fit guarantee

30-day fit guarantee If it doesn’t sit right, send it back
Secure checkout Your order is encrypted at checkout
Baltimore · Est. 1958 Hand-shaped on the original bench

What men are saying

★★★★★

“My wife said it was too good to be true. Ordered Tuesday, cap showed up Saturday. Handwritten note from Walter in the box. Better than I expected.”

Jim D. · Richmond, VA

★★★★★

“Third cap I’ve ordered from Walter. Been coming back since 2021. Never had one fall apart on me. This one’s my daily driver.”

Ed K. · Annapolis, MD

★★★★★

“Gets me compliments everywhere I go. My neighbor asked where I got it. My son-in-law asked. Told them both about Walter’s shop.”

Larry S. · Lancaster, PA

Where to get one of Walter’s caps

The last caps are only sold through Ashford & Sons, the workshop’s own shop. They are not sitting on a store shelf, and there will not be another batch like this one once the shelves are empty.

Payment and delivery: checkout accepts major cards and Apple Pay. Orders are typically shipped within 1 to 3 business days, to addresses in the United States. Shipping is paid at checkout. Every cap comes with a 30-day fit guarantee.

A man sitting on a sunny front porch with a golden retriever, wearing an olive Ashford flat cap.
One of Walter’s caps in regular use — which, as he likes to say, is the whole point.
Get your cap — $0

Shipped in 1–3 business days · 30-day fit guarantee

In short

A cap shaped on a bench that will not be here much longer.

Walter Ashford’s father opened this Baltimore workshop in 1958. Walter learned the trade at the same bench, and he still holds every cap up to the light before it leaves.

After 68 years, the workshop is closing. 2,847 finished caps are still on the shelves. Every one is $0 instead of $79.95.

“Every cap found the head that needed it. That’s enough.” — Walter Ashford, Baltimore · Since 1958

Walter’s 30-day promise

“I’d rather take the cap back than let it end up in another hat graveyard,” Walter says.

So every cap comes with a 30-day fit guarantee. Wear it to the store. Wear it to work. Wear it around the house on a Sunday. If it doesn’t sit right — if it’s too puffy or too stiff — send it back. Full refund.

Every cap is $0 instead of $79.95

Get your cap — $0

2,847 caps · 30-day fit guarantee

30-day fit guarantee · Shipping is paid at checkout

More from customers

★★★★★

“My wife likes me in it. Been married 34 years. First hat she’s ever said that about. That’s a review right there.”

John P.

★★★★★

“Every one gets shaped on the same wooden bench his dad used since ’58. The workshop is closing and these are the last ones. I grabbed two.”

Mike, 54 · Pennsylvania

A washed denim Ashford flat cap on brown wrapping paper with a handwritten note and a cup of coffee.
The cap, the paper, and the note. When the shelves are empty, this is the last chapter.
Get your cap — $0

30-day fit guarantee · Shipping is paid at checkout

Every cap is $0 instead of $79.95.

The last caps from Ashford & Sons. We’re closing. When they’re gone, they’re gone.

See every cap — $0

The last caps from this workshop · 30-day fit guarantee

DISCLOSURE: This page is an advertisement for Ashford & Sons. Please review the return and shipping policies before ordering. Testimonials are individual experiences as published on ashford-and-sons.com. The 2,847-cap figure is the remaining-stock claim stated on the site as of 11 November 2026.

Ashford & Sons · Est. 1958
Operated by Joop Yellow Strategies LLC
30 N Gould St, Ste R, Sheridan, WY 82801, United States
Phone: +1 307-430-1397
info@ashford-and-sons.com